Box Wireless Initiators

Android intelligent initiation card | change | support miniPCle support cable detonator and radio detonator Wireless communication distance: open environment, initiators to radio detonator communication distance of about 800 meters Radio detonator with loads: open environment, with capacity not less than 1000 rounds Cable detonator with loads: single detonator with capacity not less than 500 rounds, level came capacity not less than 10000

Android intelligent initiation card | replaceable | support miniPcle support cable detonator and radio detonator
Wireless communication distance: In an open environment, the communication distance between initiators and radio detonators is about 800 meters.
Radio detonator with loads: In an open environment, with a capacity of not less than 1,000 rounds.
Cable detonator with loads: The capacity of a single detonator is not less than 500 rounds, and the level - based capacity is not less than 10,000.

Box - type Wireless Initiator Android intelligence | Support replacing miniPCle initiation cards | Support wired detonators and wireless detonators.

 Standalone Mode:

1. Single-relay in Standalone Mode

In standalone operation, for open areas with a blasting distance within 3.2 kilometers, a single-relay is applicable. It ensures smooth communication, being optimized for shorter, unobstructed ranges, facilitating efficient signal transfer.

 2. Multi-relay in Standalone Mode

In standalone mode, when the blasting distance exceeds the limit or obstacles impede the wireless communication distance, a multi-relay system (up to 10 levels) can be used. This extends the communication range, overcoming long-distance and barrier challenges, guaranteeing reliable communication for the initiation system.

Cascade Mode

In the cascade mode, first, multiple wireless initiators communicate with the repeater through wired or wireless means to respectively control the detonators to enter the priming - ready state. In the cascade mode, these multiple initiators are set as slaves (1, 2...50), and then one initiator is set as the master. The master controls the ignition and detonation of the detonators through communication with the slaves. The maximum number of slaves is 50. The cascade mode can increase the load capacity of detonators for the wireless initiators and expand the coverage area of the detonation zone.
 

Performance Parameters
Main Chip: Octa - core, 2.0GHz + 1.5GHz
Operating System: Android 9.0
Memory: 3GB RAM + 32GB ROM
Resolution: 720 * 1280
Screen: 5.0 - inch capacitive touch screen, Corning Gorilla Glass - Battery: 3500mAh 8.7V, standby 50mAh
Charging: 5V 2A

Bluetooth: BT4.2
Network: 2G/3G/4G, 2.4G/5G WIFI
Positioning: GPS + BD + GLONASS
Data Communication:

GSM: B3/B5/B8

WCDMA: B1/B5/B8

LTE - TDD: 38/39/40/41

LTE - FDD: B1/B3/B5/B8

Audio: 1W speaker

Sensors: Accelerometer, ambient light sensor
Indicator Lights: Power on: red, Charging: green
Slots: 1 Nano SIM - card slot, 1 PSAM - card slot, 1 TF memory - card slot -
Interfaces: Acquisition interface, Mini PCI - E interface, Type - C interface
Notification Methods: Sound, Vibration, LED indication
Dust and Waterproof: IP67

Scan Head: NLS - N1, Barcode, TTL - 232 interface, Recognition accuracy ≥3mil

Antenna Connector: 2

NFC: Support protocols: ISO14443A/B, ISO15693, Reading distance: 0 - 5CM

Environmental Parameters

Operating Temperature: - 20°C to +55°C
Storage Temperature: - 30°C to +70°C

Operating Humidity: 5% - 95%

Electrostatic Protection: ±15kV Air discharge, ±10kV Contact discharge